BTTBW - SAVIN TONER PAK-BLACK (SAVIN T-D PAK 7911).
- MSDS: BTTBW
- Manufacturer: RICOH CORP
- Product Name: SAVIN TONER PAK-BLACK (SAVIN T-D PAK 7911).
- National Stock Number: 6850-01-299-4522
Product Identification
Product ID:SAVIN TONER PAK-BLACK (SAVIN T-D PAK 7911).
MSDS Date:11/05/1991
FSC:6850
NIIN:01-299-4522
Kit Part:Y
MSDS Number: BTTBW
Responsible Party
WEST CALDWELL, NJ 07006-6304
US
Emergency Phone: 800-336-6737
Info Phone: 201-882-2000
Preparer: KRISTINA SAGE
Cage: 54726
Contractor
Telephone: 301-517-4272 FAX 301-517-4269
Cage: 4M009
Ingredients
HYDROTREATED HEAVY NAPHTHA, CAS# 64742-48-9.
Fraction By Weight: 89.00%
ACGIH TLV: 300 PPM
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 2.00%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9394
ACRYLIC POLYMER, CAS# 25068-63-7.
Fraction By Weight: 3.00%
WAX, CAS# 9002-88-4.
Fraction By Weight: 6.00%
Hazards
LD50 LC50 Mixture:LD50 (RAT,ORAL)>5G/KG BODYWEIGHT.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SLIGHT EYE CONJUNCTIVAL
IRRIT.MILD SKIN IRRIT UNDER CONDITIONS OF EXCESSIVE EXPOSURE.NO
UNTOWARD EFFECTS FROM INHAL.CHRONIC:HEALTH STUDIES HAVE SHOWN THAT
MANY PETROLEUM HYDROCARBONS & SYN LUBS POSE POTENTIAL HYMAN HEALTH
RISKS WHICHMAY VARY FROM PERSON TO PERSON. AS PRECAUTION MIN
EXPOUSRE TO LIQ/VAPOR/MIST/FUM
Explanation of Carcinogenicity:PER MFG'S MSDS IARC HAS EVALUATED
EVIDENCE FOR CARCINOGENICITY OF CARBON BLACK & WAX AS INADEQUATE TO
DETER HUMAN RISK.
Effects of Overexposure:HIGH VAPOR CONCENTRATIONS (GREATER THAN
APPROXIMATELY 1000PPM) ARE IRRITATIVE TO THE EYES AND RESPIRATORY
TRACT, CAUSES HEADACHES AND DIZZINESS, ARE ANESTHETIC, AND MAY HAVE
OTHER CENTRAL NERVOUS SYST EM EFFECTS. AMES TEST RESULT:NEGATIVE.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:EYE:FLUSH W/CLEAR WATER FOR 15MINS OR TIL IRRIT SUBSIDES.
SKIN:REMOVE CONTAMINATED CLOTHING.CLEANSE SKIN THOROUGHLY
W/WATERLESS HAND CLEANER FOLLOWED BY WASHING W/SOAP & WATER.
INHAL:REMOVE FROM EXPOS URE.CALL PHYSICIAN IMMED. INGEST:DO
NOTINDUCE VOMITING. CALL PHYSICIAN IMMED.
Fire Fighting
Flash Point Method:TCC
Flash Point:106F,41C
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:FOAM, DRY CHEMICALS, OR CARBON MONOXIDE.
Fire Fighting Procedures:IF LEAK/SPILL IGNITED USE STD FIRE-FIGHTING
PROCEDURES FOR PETROLEUM BASED LIQUIDS.MIN BREATHING
GAS/VAPOR/FUMES/DECOMP PRODUCTS.USE SUPPLIED AIR BREATH EQIPMT
Unusual Fire/Explosion Hazard:NOT APPLICABLE.
Accidental Release
Spill Release Procedures:SHUT OFF.ELIMINATE IGNITION SOURCES.RECOVER
FREE PRODUCT.ADD SAND,EARTH OR OTHER SUITABLE ABSORBENT TO
SPILL.MIN BREATH VAPORS & SKIN CONTACT.VENTILATE CONFINED
SPACES.KEEP OUT OF SEWERS & WATERCOURSE S W/DIKE OR COMPOUNDING.IF
SO NOTIFY AUTHORITIES.
Neutralizing Agent:NOT APPLICALBE.
Handling
Handling and Storage Precautions:CAUTION! COMBUSTIBLE LIQUID. KEEP AWAY
FROM HEAT, OPEN FLAME AND SPARKS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE (LIQ &/OR VAPORS) AND
CAN BE DANGEROUS. IN ORDER TO AVOID THE RISK OF EXPOSURE, DO NOT
PRESSURE, OR EXPOSE SUCH CONTIANERS TO HEAT, SPARKS, OR OTHER
SOURCES OF IGNITION .
Exposure Controls
Respiratory Protection:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Ventilation:MECHANICAL (GENERAL):ADEQUATE VENTILATION. LOCAL
EXHAUST:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Protective Gloves:NONE NEED UNDER NORMAL CONDITION OF USE.
Eye Protection:NONE NEED UNDER NORMAL CONDITION OF USE.
Other Protective Equipment:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Work Hygienic Practices:MIN BREATH VAPOR/MIST.AVOID PROLONG/REPEAT SKIN
CONTACT.LAUNDER/DRYCLEAN CONTAMIN CLOTH/SHOE BEFORE REUSE.
Supplemental Safety and Health
CLEANSE SKIN THOROUGHLY AFTER CONTACT,BEFORE BREAKS & MEALS & @ END OF
WORK PERIODS. PRODUCT IS READILY REMOVED FROM SKIN BY WATERLESS
HAND CLEANERS FOLLOWED BY WASHING W/SOAP & WATER.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:322F,161C
Vapor Pres:<10 @25C
Vapor Density:>5
Spec Gravity:0.78 @15.6C
Evaporation Rate & Reference:0.3, N-BUAC=1.
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:BLACK LIQUID, FAINT PETROLEUM HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS SUCH AS LIQUID CL2 OR CONCENTRATED
O2.
Stability Condition to Avoid:NOT APPLICABLE. HOWEVER AVOID IGNITION
SOURCES & HIGH TEMP.
Hazardous Decomposition Products:PER MSDS WILL NOT OCCUR.
Disposal
Waste Disposal Methods:WASTE LIQ SHOULD BE DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER & IAW GOVERNMENTAL REGS. DISPOSAL REGS
VARY FROM LOCALITY TO LOCALITY, THEREFORE, CONSULT YOUR LOCAL
OFFICE OF THE EPA TO DETERMINE PR OPER METHOD OF DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.